9.10.1  Criminal Investigation Management Information System Equipment Inventory

9.10.1.1  (06-15-2010)
Overview

  1. The Integrated Financial System (IFS) property asset management module is in the process of being developed and/or used to track IRS property from acquisition through disposal. Until such time that the IFS asset module is fully implemented agency wide, Criminal Investigation (CI) will continue to maintain its investigative equipment and government owned vehicles (GOV) on the Criminal Investigation Management Information System (CIMIS) and its furniture and computer hardware and software on the Information Technology Asset Management System (ITAMS).

  2. This section discusses CIMIS topics as described in the following subsections:

    1. Description and Purpose

    2. Equipment Items to be Tracked in CIMIS

    3. Acquisition of Equipment into CIMIS Ordered by CI Headquarters

    4. CIMIS Responsibilities

    5. Documentation, Forms, and Reports

    6. Employee Equipment Assignments

    7. Transfer of Unassigned Equipment

    8. Temporary Custody and Consignment of Equipment

    9. Disposal of Equipment

9.10.1.2  (06-15-2010)
Description and Purpose

  1. The Equipment module of the CIMIS, a web-based inventory tracking system, was introduced to not only replace the former Criminal Investigation Equipment Control System (CIECS) application, but in addition, to provide an enhanced "checks and balances" system for the tracking of CI equipment for all field offices, Director, Field Operations areas, and CI Headquarters (HQ).

  2. The system was implemented in 2005 and allows management to track where equipment is, to whom it is assigned, and to generate reports about the equipments’ acquisition, use, history, and disposal. The system also gives CI field offices access to their assigned equipment for the purpose of queries and updates of selected data based on CIMIS roles and responsibilities.

9.10.1.3  (06-15-2010)
Equipment Items to be Tracked in CIMIS

  1. Current policy dictates that all investigative equipment accessories and supplies valued at $900 or more, as well as all motor vehicles regardless of value, will be tracked in CIMIS.

  2. Most investigative equipment, accessories and supplies valued at less than $900 will be considered disposable items and will not be entered into CIMIS unless otherwise specified by the Office of Operations and Policy Support (CI:OPS), Security and Technical Operations (CI:OPS:STO) section.

  3. Sensitive investigative equipment and property susceptible to being converted to personal use will be entered into CIMIS regardless of cost. These items include, but are not limited to, the following items:

    1. firearms (including weapons converted to training weapons)

    2. pocket commissions

    3. enforcement wallet badges

    4. enforcement belt badges

    5. body armor (e.g., bulletproof vests)

    6. digital cameras

    7. video recorders

    8. GPS units

  4. Computer equipment generally will not be entered into CIMIS unless otherwise specified by CI:OPS:STO personnel. Exceptions currently include computer equipment assigned for undercover use and some types of computer equipment utilized by the HQ Electronic Crimes analysts while providing investigative data support.

  5. Office equipment will not be entered into CIMIS unless otherwise specified by CI:OPS:STO personnel. Exceptions currently include office furniture and equipment assigned for undercover use.

  6. The normal procurement process mandates that CI HQ staff will enter new investigative equipment and motor vehicles into CIMIS in "ordered status" . When the field offices receive the equipment or take possession of the vehicles, the equipment should be "acquired " and assigned to either a permanent custodian or a storage location in CIMIS by the field office equipment coordinator. All other identifying information about the equipment item or motor vehicle that was not previously entered when entering the ordered record (e.g. equipment serial number(s)/VIN, vehicle color, tag number, registration, current odometer reading, etc.) should be updated accordingly in CIMIS when acquiring the record.

9.10.1.3.1  (06-15-2010)
Equipment Categorization

  1. The CIMIS system groups equipment items by up to three different levels of classification. The most general grouping is the Category. Then, within each Category of equipment are various Sub-Category values. For certain types of equipment, such as weapons, radios and motor vehicles, a third level under the Sub-Category is defined as the Sub-Category Class. It is by these increasingly detailed levels of categorization that we can easily identify an equipment item and extract the data necessary to adequately report on the tracking of the different types of equipment in CIMIS. At a minimum, each equipment item and motor vehicle must have a Category and Sub-Category value entered in CIMIS.

9.10.1.3.2  (06-15-2010)
Equipment Acquisition Values

  1. Criminal Investigation Management Information System captures the method used to acquire the equipment item or motor vehicle. Generally, procured equipment items will have an acquisition method of "Purchased" .

  2. Equipment acquired by an office through a no-cost acquisition such as forfeiture, donation, or replacement under warranty, will be entered into CIMIS using the appropriate acquisition type. (Instructions on accessing CIMIS and operating instructions for the CIMIS database are found in the CIMIS User’s Guide and through online tutorials).

9.10.1.3.3  (06-15-2010)
Funding and Special Use Values

  1. Criminal Investigation Management Information System tracks the funding source of each equipment item in the system. Generally, items are purchased using normal CI appropriated funds. Occasionally, however, funding is received through other sources such as Asset Forfeiture, High-Intensity Drug Trafficking Area (HIDTA), IRS emergency appropriation, and various Joint Terrorism Task Force (JTTF) funds.

  2. Criminal investigation Management Information System tracks what type of special usage may be made of an investigative equipment item or motor vehicle. Therefore, the intended use of a piece of equipment should be considered when entering it into CIMIS (i.e., Technical Operations/Surveillance or IRS Forensic Lab). If there is no special use of the item, then no entry is made in CIMIS.

9.10.1.4  (06-15-2010)
Acquisition of Equipment into CIMIS Ordered by CI Headquarters

  1. The following are the procedures for acquisition of equipment into CIMIS:

    1. The award information is forwarded to STO including allocation spreadsheets and packing list instructions. Headquarters enters the known equipment information into CIMIS including the "ordered status" specifics and notifies the field office and/or Director, Field Operations CIMIS equipment coordinators. Headquarters forwards the CIMIS equipment order information to the CIMIS equipment coordinators along with the contact information for returning the packing list.

    2. Upon receipt of the equipment, the CIMIS Coordinators will "acquire" the equipment in CIMIS per packing list information and forward the packing list to the HQ’s contact for entry into WebRTS (Web Requisition Tracking System). At this time, the CIMIS equipment coordinators should also enter all other identifying information regarding the equipment including:
      the serial number/VIN; the custody or storage assignment information; and, add any further comments or notes.

9.10.1.4.1  (06-15-2010)
Field Office Purchases

  1. Occasionally, equipment is purchased outright by an office without having been procured and ordered by HQ staff. All investigative equipment purchases must be approved by CI:OPS:STO to ensure that the purchase is compatible with current equipment regulations. Copies of all invoices for any equipment should be forwarded to the CIMIS equipment coordinator. The following information should also be provided:

    1. category

    2. sub-category

    3. manufacturer

    4. model name/number

    5. serial number

    6. acquisition date/cost

    7. employee or storage location assigned



    The CIMIS equipment coordinator will acquire the equipment into CIMIS.

9.10.1.4.2  (06-15-2010)
Equipment Acquired through Asset Seizure and Forfeiture

  1. The CIMIS equipment coordinator should verify through the asset forfeiture coordinator that any assets being placed in inventory for official use have the appropriate approval and documentation based on current asset forfeiture guidelines. The CIMIS equipment coordinator will use the forfeiture date as the acquisition date and the fair market value of the item on the date of forfeiture for the purchase price.

9.10.1.4.3  (06-15-2010)
Kit Procedures

  1. Assembled kits consist of related equipment items which are used collectively as one unit. Some examples include surveillance vans, camera kits, and radio repeaters. Instructions for adding assembled kits to CIMIS are listed below in paragraph 2.

  2. Create the kit in CIMIS (refer to CIMIS Upgrade 4.1-45 for naming guidelines and specific instructions). Add the related CIMIS items in the kit (items over $900). Any items to be included in the kit that are under $900 should be referenced in the notes section under the individual item. They will be identified by description and serial number if applicable (e.g., main item - NIKON Camera $1,528; related - 1.14-50mm Nikon Lens $799; Notes in View/Edit Equipment - 1.25mm Nikon Lens s/n 15222).

9.10.1.4.4  (06-15-2010)
Undercover Assets

  1. The Special Investigative Techniques (SIT) CIMIS equipment coordinator will be responsible for entering all undercover assets into CIMIS and will follow established CIMIS procedures. The real serial numbers, manufacturer, model numbers, and description of these items should be entered.

9.10.1.5  (06-15-2010)
CIMIS Responsibilities

  1. The CIMIS equipment responsibilities of the HQ-CIMIS staff and the local office CIMIS equipment coordinators are set forth in the subsequent subsections. Responsibilities not directly related to the CIMIS database, but pertaining to the property management of investigative equipment, can be found in IRM 9.11.3, Investigative Property.

9.10.1.5.1  (06-15-2010)
CI Headquarters CIMIS Staff Responsibilities

  1. Providing an electronic extract of CIMIS equipment data to various requestors when required.

  2. Providing and maintaining updated listings of the various codes and values required in CIMIS equipment activities. Current procedures dictate that these types of materials be posted online and available to the entire CI user community.

  3. Providing ad hoc reports to CIMIS equipment users and management to assist in various activities, including but not limited to, performing annual physical inventory of all equipment and motor vehicles, monitoring the routine maintenance and upkeep of the general fleet of motor vehicles, and conducting ad hoc audits of sensitive investigative equipment.

9.10.1.5.2  (06-15-2010)
CIMIS Coordinator Responsibilities

  1. The equipment coordinator acts as an office’s focal point with the highest level of input and query for CIMIS. The coordinator responsibilities include:

    1. Coordinate roles (permissions) for new CIMIS equipment users.

    2. Ensure all excess equipment is offered to all other field offices prior to disposal.

    3. Ensure all notifications of equipment available are shared with management.

    4. Ensure all users are aware of security procedures.

    5. Train local group users.

    6. Keep users and supervisors informed of changes and/or updates regarding procedures.

    7. Ensure all supporting documentation for all actions (i.e., transfers, disposals, etc.) is completed and maintained.

    8. Ensure a physical inventory of investigative equipment is completed by August 31st; all corrections to inventory completed in CIMIS by September 20th; and the inventory report is submitted through the Director, Field Operations, to the Director, CI:OPS:STO by September 25th annually.

    9. Review and follow up on any pending receipts, transfers, and disposals twice a month. Management should be notified after 60 days of all discrepancies.

    10. Reconcile any equipment in temporary (loan or consignment) status prior to conducting the annual inventory or whenever an employee is transferred or separated from the Service.

9.10.1.5.3  (06-15-2010)
Separation of Duties

  1. The CIMIS Equipment Coordinator/Backup Coordinator cannot perform any physical inventory of equipment or have custody or control of investigative equipment.

  2. An individual conducting a physical inventory cannot have custody or control of the equipment being inventoried.

9.10.1.6  (06-15-2010)
Documentation, Forms, and Reports

  1. Each office will be required to keep the documentation used for updating CIMIS. In addition to local record keeping, the notes section in CIMIS should be used to explain in detail all unusual activity and/or circumstances. Current IRM guidelines for the maintenance and disposal of these records shall be followed.

  2. When a property officer issues an employee personal property and assigns it accordingly in CIMIS, a new CIMIS EQR01 (Custody Receipt for Government Property Report) will be issued for that employee. The current EQR01, with the employee's signature, shall be maintained in a file.

  3. The CIMIS equipment coordinator is required to run the CIMIS EQR09 (Transfer/Receipt of Government Property Report) for all equipment transferred between offices in CI.

    Note:

    This does not refer to equipment that is transferred outside of CI to another IRS section or another agency. That would be considered a disposal of the equipment and the applicable disposal method would be recorded.

    1. When the equipment record(s) are placed in pending transfer status, the sending office will generate CIMIS report EQR09 and forward it to the gaining office with the equipment. The sending office will also send a courtesy e-mail to alert the receiving office of the pending transfer.

    2. Upon receipt of the equipment, the gaining office will accept the transfer of the equipment in CIMIS and assign it to a storage location or the permanent custody of an employee.

    3. When completed, this activity will cause CIMIS to generate an automated e-mail notification of the transfer acceptance to the sending office; it is therefore not necessary for the gaining office to return the EQR09 to the losing office.


9.10.1.6.1  (06-15-2010)
Vehicle Usage Reporting

  1. The CIMIS system will be used to record and report vehicle mileage and maintenance activities. Vehicle information will be entered into CIMIS at the following times:

    1. Monthly mileage-entered by the 20th day following the end of the month. In addition to recording the monthly mileage, the CIMIS equipment user will enter the data from the "Home to Work" and "Extraordinary Use Vehicle Log" in CIMIS.

    2. Vehicle fuel and maintenance expense records-entered monthly by the 20th day following the end of the month (recommended procedure).

    3. Optionally, vehicle fuel and maintenance expense records may be entered quarterly, by the 20th day following the end of the quarter.

  2. The Director, Security and Technical Operations (CI:OPS:STO) will use the mileage records contained in the CIMIS system to identify vehicles for which replacements will be ordered. The Special Agent in Charge (SAC) will report to CI:OPS:STO those vehicles that should be replaced due to excessive maintenance costs or for other reasons prior to the normal replacement cycle.

9.10.1.7  (06-15-2010)
Employee Equipment Assignments

  1. All acquired equipment must be assigned in CIMIS to an active CI employee who is accountable for that equipment. Over the course of the life of an equipment item, it may change hands several times, but at all times there will be an active CI employee accountable for that item regardless of who is in physical control of it at any given moment.

  2. There are two types of equipment assignments that confer accountability for the equipment item: permanent custody and the management of equipment that is in a storage location. Each time the custody of, or accountability for, property is assigned to an employee, the CIMIS inventory should be updated and a CIMIS report EQR01 or CIMIS EQR02 (Storage Responsibility for Government Property Report) will be generated for the accountable employee to sign. These reports will be maintained in a file(s) designated by the SAC.

  3. There are three types of equipment assignments that reflect the current physical status, or "control" , of the equipment item but do not confer accountability to the employee assigned because they are recognized to be only temporary: temporary custody, consignment, and shipment.

    1. When an equipment item’s current assignment is one of the above three types of temporary control, the accountability for the equipment remains with the employee who last was assigned either permanent custody or storage location management for the item. It is incumbent on this accountable employee to monitor the status of the equipment while out in one of these three types of temporary assignment.

    2. There are rare occasions when the accountability-conferring assignment must be ended while an equipment item is currently in one of these temporary assignments. For example, an employee who has permanent custody of a radio, and therefore is accountable, had to send the radio to the vendor for repair, so the current assignment would be consignment. Before the radio is returned to the office, the employee separates from CI and can therefore no longer be held accountable for the radio. In these types of instances, there is a sixth type of assignment referred to as an "interim home" assignment. The interim home assignment would be an active storage location to which the accountability could be assigned for this radio until it is returned to the office and reassigned to an employee or storage location.

9.10.1.7.1  (06-15-2010)
Transfer of Employee with Equipment

  1. When an employee is transferred who has "personal" equipment assigned to them, the equipment will automatically be transferred in CIMIS and remain in the employee’s permanent and/or temporary custody. Additionally, unless unchecked during the Transfer/Detail Employee activity, all non-personal equipment assigned to the employee’s permanent custody will also get transferred. Therefore, if you don’t want the assigned car/radio to go to the gaining office, or if the transferring employee has specialty equipment (i.e., radios, tech, photographic equipment) assigned to him/her, this equipment must be physically inventoried and reassigned before the employee is transferred. The gaining office should run CIMIS report EQR01, and physically inventory all equipment the transferring employee has brought with them. The employee will sign the EQR01 and provide it to the CIMIS equipment coordinator for proper filing.

9.10.1.7.2  (06-15-2010)
Retirement and Separation of Employee with Permanent or Temporary Custody of Equipment

  1. In all instances of an employee's separation from IRS, where equipment has been assigned to the employee, there are certain common procedures that must be followed so that the equipment assignment end dates are in line with the employee profile termination date.

    1. The CIMIS equipment coordinator shall ensure that the employee has surrendered all equipment in his/her permanent and temporary custody prior to his/her departure from CI. This can most easily be accomplished by generating the EQR01 report, and the CIMIS EQR08 (Equipment Checked into Temporary Custody Report) for the employee and then checking each item off as it has been verified to be returned.

    2. Once this is done, the CIMIS equipment coordinator shall notify the CIMIS employee coordinator that the Employee Profile Record for the separating person can be terminated in CIMIS. While performing the terminated employee's activity, the CIMIS employee coordinator assigns all custodial equipment to the field office’s "Terminated Employees" storage location, thereby ensuring that the equipment reassignment dates are in sync with the date the equipment was surrendered by the employee prior to separation.

    3. When the CIMIS employee coordinator has successfully terminated the CIMIS Employee Profile record, then AND ONLY THEN shall the CIMIS equipment coordinator return and transfer the employee’s enforcement wallet badge, enforcement belt badge and pocket commission in CIMIS to CI:OPS:STO for further action.

    4. Additional subsequent actions by the local office CIMIS equipment coordinator will include reassigning the former employee’s remaining equipment (e.g. motor vehicle, radios, weapon, etc.) in CIMIS to a new employee or storage location. In the instance of the employee’s body armor, it will remain in the field office’s storage location until its destruction at which point it will be disposed in CIMIS by the CIMIS equipment coordinator.

  2. An agent who is retiring in good standing, may request to have his/her enforcement belt badge embedded in Lucite at his/her own expense or to have the enforcement wallet badge mounted in a shadow box with the pocket commission at CI’s expense. The badges and pocket commission should be shipped to CI:OPS:STO, 1111 Constitution Ave N.W., Room G237 Washington, DC 20224. If the election is made to have the enforcement belt badge embedded in Lucite, an order form and cashier’s check or money order made out to VH Blackinton for the full amount of payment must accompany the enforcement badges and pocket commission. The Disposition of Enforcement Badges and Pocket Commission memorandum from the SAC or Director, to the Director, Security and Technical Operations, along with a STO Request Tracking Form will be emailed to the HQ-STO inbox. The employee’s CIMIS equipment coordinator will transfer the enforcement wallet, belt badges, and the pocket commission in CIMIS to Org Code 20 - HQ Security and Technical Operations. Upon receipt of the equipment, the designated STO analyst will accept the transfer in CIMIS. The ID Media Coordinator will process the retirement of the enforcement wallet badge, enforcement belt badge, and pocket commission. The ID Media coordinator shall maintain a file of all retirement memorandums.

  3. If a retiring agent does not elect to have his/her enforcement belt badge embedded in Lucite or have his/her enforcement wallet badge and pocket commission mounted in a shadow box, both enforcement badges (wallet and belt) as well as the pocket commission will be shipped to CI:OPS:STO, 1111 Constitution Ave N.W., Room G237 Washington, DC 20224. The Disposition of Enforcement Badges and Pocket Commission memorandum from the SAC or Director to the Director, CI:OPS:STO, along with a STO Request Tracking Form will be emailed to HQ-STO. The employee’s CIMIS equipment coordinator will transfer the badges and pocket commission in CIMIS to Org Code 20 - HQ Security and Technical Operations. The designated STO analyst will accept the transfer of the equipment in CIMIS, place the badges and pocket commission back into inventory for destruction.

  4. All enforcement badges, belt badges and pocket commissions must be returned and transferred in CIMIS to Org Code 20 - HQ Security and Technical Operations upon retirement, separation, or change in GS-1811 job series. Field offices will not maintain an inventory of enforcement wallet or belt badges for reassignment at any time.

    Note:

    The pocket commission, enforcement badge, or belt badge will not be disposed of locally.

9.10.1.7.3  (06-15-2010)
Storage Equipment Assignments

  1. Equipment items that are not in the permanent custody of a CI employee will be assigned to a storage location, formerly referred to as an "unassigned pool" . Typically, the categories of equipment that are most often stored include, but are not limited to: microfilm equipment, firearms training equipment, miscellaneous audio, video and photographic equipment, radio equipment, and various types of tech agent and undercover operation equipment. Additionally, every office shall have a storage location in CIMIS to which the equipment that was in the custody of separating (terminated) employees can be reassigned.

  2. An active storage location will always have a designated equipment manager who is accountable for all of the equipment that is either stored or linked by interim home to the storage locations while he/she is the manager. An equipment manager can be any active CI employee. (They are not required to work in the same office as the office that owns the equipment.) The important factor is that the equipment manager be physically located in a location where he/she can properly monitor and control access to the stored equipment. For instance, an area Director, Field Operations office and a field office may be co-located in an office building. As such, the gun safe where firearms are stored may contain shotguns assigned to either or both of these organizations. One option in CIMIS would be to treat the gun safe as one storage location with one designated equipment manager who would manage the equipment owned by both offices. Alternatively, the vault could be reflected in CIMIS as two storage locations, (e.g. " Director, Field Operations Weapon Storage" and "FO Weapon Storage" ) if there are two separate employees managing the separately owned firearms. Depending on the scope of the equipment coordinator who runs the EQR02 reports for stored equipment, more than one report may be necessary to show all equipment physically stored in that location. In the first example above, the Director, Field Operations equipment coordinator would likely have scope over both the Director, Field Operations office and the field office and would therefore be the best one to run the reports.

  3. With the special exception of the "Terminated Employees" storage location, all other storage location records in CIMIS should be created and maintained to accurately describe the physical location of the equipment using as much detail as desired. Criminal Investigation Management Information System will allow the coordinator to put in several levels of description, (e.g. Description 1, Description 2, etc.), in order to describe the physical location of the stored equipment. Criminal Investigation Management Information System also requires that each storage location record reflect a good street address. Other examples of storage locations include a desk drawer, closet or cabinet in a CI office, a warehouse, a parking lot or garage, or an actual storage unit. The intent is to be able to quickly and accurately determine the location and employee accountability of each stored equipment item.

9.10.1.8  (06-15-2010)
Transfer of Unassigned Equipment

  1. When transferring unassigned equipment, the losing field office will be responsible for initiating the transfer process in CIMIS. The losing field office must notify the gaining field office that there is equipment in CIMIS to accept. Notification of pending transferred equipment to be accepted can be done either by e-mail or by sending CIMIS report EQR09, to the gaining field office. The gaining field office will accept the equipment transfer in CIMIS when the equipment is physically received.

  2. The CIMIS equipment coordinator of the losing field office will check the equipment records pending transfer in CIMIS twice a month and follow up with the gaining field office to confirm receipt. If a transfer is in pending status for more than 60 days, the CIMIS equipment coordinator must notify his/her supervisor. The supervisor must contact the gaining office to resolve the pending status.

  3. When transferring equipment across a large physical distance, all equipment must be packaged securely and shipped using the approved carrier. The shipper's tracking number should be obtainable so that the equipment shipment can be tracked. If desired, the CIMIS equipment coordinator of the losing office may create a shipment control assignment in CIMIS when transferring the equipment record. In these situations, the shipment assignment should be created before the pending transfer is input but can be done immediately afterward if need be.

9.10.1.9  (06-15-2010)
Temporary Custody and Consignment of Equipment

  1. All equipment assigned to a CI employee on a non-permanent basis must be assigned as temporary custody. Each temporary custody assignment must reflect the name of the CI employee who authorized the loan and the estimated date of return. Once the temporary custody assignment has been created, the accountable employee will be responsible for monitoring the status of the loan and following up with the temporary custodian to ensure that the item is returned to its permanent custodian or storage location.

9.10.1.9.1  (06-15-2010)
Temporary Custody to Employee(s) in Another Field Office

  1. When equipment is loaned between CI offices and remains out in temporary custody for longer than 1 year, both the loaning and the borrowing office CIMIS Equipment Coordinators will ensure that the loaned equipment is properly accounted for during the annual physical inventory process. The loaning office will generate CIMIS EQR07 (Equipment Checked Out on Temporary Custody or Consignment Report) and the borrowing office will generate CIMIS report EQR08. Using these reports, the coordinators will verify the equipment status with the temporary (borrowing) custodian and the accountable (loaning) employee.

  2. Upon return of the loaned equipment, the temporary custody is automatically ended when a new assignment is created for the equipment.

  3. In some instances, an equipment item may go directly from one temporary custodian to another temporary custodian, a situation termed "serial loaning" that most often occurs with specialized technical equipment that is used in surveillance and/or undercover operations. In all cases of serial loaning, the accountable employee must be closely involved in monitoring the whereabouts of the equipment and ensuring that it is accurately assigned in CIMIS to the current temporary custodian.

9.10.1.9.2  (06-15-2010)
Temporary Custody Within the Same Field Office

  1. As previously mentioned, for purposes of conducting official reviews, audits, and/or physical inventories of equipment in the temporary custody of a CI employee, the CIMIS equipment coordinator will run the CIMIS report EQR01. When the equipment is owned by an office and is loaned to an employee in the same office, the CIMIS equipment coordinator for that office will be able to run the EQR01 so that the temporary custody equipment will show up for the employee. The report should not be run by any equipment user with group level permissions because there is a good chance the loaned equipment is not owned by that same group and would therefore not show up on the EQR01 report when run by the group CIMIS user.

  2. For stored equipment that is loaned out frequently and has a value of less than $900, the "loans out of storage" will be tracked using a sign-out log. This log must include the borrower’s name, date signed out and description of equipment (including serial number). All sign-out logs shall be in an accessible central file and/or posted by the location of the equipment.

9.10.1.9.3  (06-15-2010)
Loaning to Other Agencies and Vendors for Consignment

  1. All equipment temporarily sent outside of CI for purposes of loaning to other government agencies or sending to vendors, e.g., Motorola, for repair/maintenance must be tracked in CIMIS using the Consignment activity. The CIMIS equipment coordinator will generate CIMIS report EQR07, for the borrower to sign. Equipment may be loaned to other agencies only with the approval of the SAC, CI:OPS:STO, or their designee.

9.10.1.10  (06-15-2010)
Disposal of Equipment

  1. Disposal of investigative equipment and investigative accessories and supplies in good working condition may be done by HQ, Director, Field Operations, and field offices 30 days after the equipment has been offered to other offices via an e-mail to all CIMIS equipment coordinators. No additional approval is required after the 30-day period has expired. All fleet vehicles, plus any equipment that is obsolete or broken, can be disposed of without offering them to other field offices. Special use vehicles (i.e., undercover, surveillance, etc.) must be offered to other offices for 30 days prior to disposal. Tech equipment and radio equipment disposals must be approved by CI:OPS:STO.

  2. Any equipment items in CIMIS that are disposed using one of the following disposal methods will be reported on Form 1933, Report of Survey: "Lost" , "Stolen" , or "Damaged/Destroyed" . See IRM 9.11.3, Investigative Property, for specific instructions on how to prepare and gain approvals for Form 1933. In all cases, after final approval, Form 1933 shall be forwarded to the CIMIS Equipment Coordinator for disposal in CIMIS. The CIMIS equipment coordinator should also make a comment in the "Equipment Notes" screen to indicate that a Form 1933 is on file.

  3. When property has been disposed of, that disposal will be entered in the CIMIS system by the disposing office. The appropriate disposal type will be entered in the CIMIS record to accurately record the reason for disposal of the item.

9.10.1.10.1  (06-15-2010)
Disposing Vehicles

  1. All fleet vehicles will be disposed of in CIMIS using the "Exchange/Sale" disposal method. There is no requirement to advertise the availability of these vehicles to other field offices. The CIMIS equipment coordinator will be responsible for preparing the spreadsheet which will be faxed or e-mailed to Griffin Tire and Battery (GTB), or other authorized disposing agencies as directed by HQ.

  2. Upon submitting the required documentation to the proper disposing agency, the CIMIS equipment coordinator will place the vehicle in final disposal in CIMIS using the "Exchange/Sale" disposal method. Once CI is notified that the vehicle has been sold, the CIMIS equipment coordinator will update the equipment record with the proceeds.

9.10.1.10.2  (06-15-2010)
Disposing Electronic Surveillance Equipment - Tech Agent

  1. Equipment of this nature will not be disposed of without approval of CI:OPS:STO.

9.10.1.10.3  (06-15-2010)
Disposing Firearms - Including Weapons Converted to Training Weapons

  1. Firearms may not be disposed of using the "Exchange/Sale" disposal code.

  2. Firearms may be disposed of using the "Excess" disposal method provided such firearms are in excellent condition and known to be used for security or law enforcement, or are sufficiently unique to be of interest to a Federal museum.

  3. Firearms not reportable under the above provisions may be sold as scrap (using the CIMIS disposal code for "Salvage/Scrap" ) after total destruction by crushing, cutting, breaking, or deforming in a manner to assure the firearms are completely inoperative and to preclude their being made operative.


More Internal Revenue Manual