- 4.4.33 Transfers
- 220.127.116.11 Introduction
- 18.104.22.168 Transfer Restrictions
- 22.214.171.124.1 AIMS Freeze Code Present
- 126.96.36.199.2 PBC 309
- 188.8.131.52.3 PICF Code
- 184.108.40.206.4 Skeletal Records
- 220.127.116.11.4.1 Non-Filer Case
- 18.104.22.168.5 Source Code
- 22.214.171.124.6 Statute of Limitations
- 126.96.36.199.6.1 Transfer Out Time Frames
- 188.8.131.52.7 TE/GE Case
- 184.108.40.206 Form to Use
- 220.127.116.11 Special Rules for Certain Types of Transfers
- 18.104.22.168.1 Transfers Between Area Offices (including PBC 315) or Between Industry and Area Office
- 22.214.171.124.2 Between Industries (excluding PBC 315)
- 126.96.36.199.3 Transfers from Campus to Industry/Area
- 188.8.131.52.4 Transfers from Campus to Campus
- 184.108.40.206.5 Transfers from Area Office to Campus
- 220.127.116.11.6 Transfer to Other Functions
- 18.104.22.168.6.1 To Appeals
- 22.214.171.124.6.2 To Another Agency
- 126.96.36.199.6.3 To Criminal Investigation
- 188.8.131.52.6.4 To Division Counsel
- 184.108.40.206.6.5 Form 2275, Records Request Charge and Recharge
- 220.127.116.11.7 Where to Send Returns
- 18.104.22.168 Transfer Time Frames
- 22.214.171.124 Effect of Transfers on AIMS
- 126.96.36.199.1 Aging Reason Code
- 188.8.131.52.2 Correspondence Received Date
- 184.108.40.206.3 Employee Group Code/Secondary Business Code/Status Code
- 220.127.116.11.4 Exam Start Date
- 18.104.22.168.5 Letter Sent Date
- 22.214.171.124.6 Project Code
- 126.96.36.199.7 Reply to TP Projected Date
- 188.8.131.52.8 Suspense Code
- 184.108.40.206.9 Technical Services Code
- 220.127.116.11.10 Tracking Code
- 18.104.22.168.11 Transfer Terminal Code
- 22.214.171.124 Erroneous Transfers
- 126.96.36.199 Receiving Office Procedures
- Exhibit 4.4.33-1 SB/SE Transfer Chart
Part 4. Examining Process
Chapter 4. AIMS Procedures and Processing Instructions
Section 33. Transfers
This chapter provides instructions for transferring returns once it has been determined that a transfer is warranted per IRM 4.11.29, Transfer of Returns Open for Examination.
Although not technically a transfer, returns going to another IRS Division or outside agency are also discussed in this chapter.
Not all cases can be transferred. Cases meeting the following criteria cannot be transferred.
If there is an AIMS freeze code of A-G, I-J, L, Q-S, or V-W which are local freeze codes present on the case, the transfer will be blocked. You must remove local AIMS freeze codes before a case can be transferred.
PBC 309 is used when the appropriate industry cannot be determined by the NAICS code. Cases cannot be transferred to PBC 309.
If the PICF Code is 9, the error message "CANNOT TRANSFER, PICF CODE - 9" will be displayed. The PICF code should automatically update out of 9 the next weekend; reinput the AMSOC, DC 30 the next week.
Skeletal records cannot be transferred. AIMS will reject the input with the error message "CANNOT TRANSFER - TC 424 RECORD"
Records with Source Code 45 cannot be transferred. The error message "Source-Code/Disposal-Code Inconsistent" will be displayed if the record attempting to be transferred has a source code of 45. See Reference Return procedures in Exhibit 4.4.1–1.
The statute of limitations must be within the time frames below. These are the time frames that are programmed into AIMS.
IF the transfer is from PBC: to PBC: THEN the time remaining
on the statute must be;
190-194 or 295-299 or 398 190-194 or 295-299 or 398 7 months or more* 190-194, or 295-299 or 398 201-207, 212-214 13 months or more** 190-194 or 295-299 or 398 301-306, 315 7 months or more* 201-207, 212-214, 190-194 or 295-299 or 398 13 months or more** 201-207, 212-214, 201-207 or 212-214 13 months or more** 201-207, 212-214, 301-306, 315 7 months or more* 301-306, 315 190-194 or 295-299 or 398 13 months or more** 301-306, 315 201-207 or 212-214 13 months or more** 301-306, 315 301-306, 315 7 months or more* *If a return is received with less than 6 months left on the statute, the transfer-in clerk will refer the case to his/her manager to determine if case will be accepted. These time frames are to allow for processing and mailing time. **If a return is received with less than 12 months left on the statute, the transfer-in clerk will refer the case to his/her manager to determine if case will be accepted. These time frames are to allow for processing and mailing time.
A transfer that does not meet the time frame criteria, cannot be input unless
the Source Code is 30 (claim for refund), or 32 (carryback refund), or
the joint investigation indicator is set (NMF only) or
TC 910-914 is present on AIMS, or
MFT Code is 06, or
the Aging Reason Code is 53 which is used for Audit Reconsideration cases
alpha characters (excluding FF) have been used to update the AIMS statute date.
ZZ is used to update the statute date temporarily to allow the transferring of the database. Approval must be received from the gaining office before ZZ can be input. A copy or note as to who approved the transfer should be put in the case file that is being transferred in case there is a question as to who approved the transfer. Gaining office must update back to correct ASED upon receipt of the case file and data base.
Records that do not meet the criteria above should be returned to the originator with a copy of the reject message "CANNOT TRANSFER - STATUTE HAS LESS THAN 7 or 13 MONTHS REMAINING" .
If the PBC is 4XX, you cannot transfer to a PBC of 1XX, 2XX or 3XX. The error message "TIF PBC = 4, CANNOT TRANSFER TO XXX (XXX = INPUT PBC)" will be displayed. If exam agrees to give the case to TE/GE, Exam must close the case DC 33. TE/GE must wait until the AIMS base ages before TE/GE can establish the case on AIMS in PBC 4XX.
If the PBC is 1XX, 2XX or 3XX, you cannot transfer to a PBC 4XX. The error message "TIF PBC = 4XX, CANNOT TRANSFER TO XXX" will be displayed. If TE/GE agrees to give the case to Exam, TE/GE must close the case DC 33. Exam must wait until the AIMS base ages before Exam can establish the case on AIMS in PBC 1XX, 2XX or 3XX.
Use Form 3185, Transfer of Return for transfers in which the Primary Business Code will change. See IRM 4.11.29, Transfer of Returns Open for Examination for instructions on the completion of Form 3185.
Use Form 3210 for all other types of transfers such as within area/industry.
The following are the most common types of transfers:
In addition to the procedures in IRM 4.11.29, Transfer of Returns Open for Examination, the group secretary must take the following steps when transferring out a return.
Update ERCS to Status Code 41, Disposal Code 30 and forward case to the transfer-out personnel in your area or support area. See IRM 4.1.4, Other Programs and Other Source Work
In addition to the procedures in IRM 4.11.29, Transfer of Returns Open for Examination, the transfer-out personnel must take the following steps when transferring out a return.
Transfer the data base on ERCS. Enter the Primary Business Code (PBC) of receiving office. See Exhibit 4.4.33-1 for a list of states and the corresponding PBC. If the PBC is 212-214 or 301-306, also enter the secondary business code and employee group code. ERCS will generate the Command Code AMSOC, Disposal Code 30 to update AIMS. If the PBC changes, AIMS will generate a TC429 to Master File and the TC42X PBC will change to reflect the new PBC.
After the AMDISA reflects the transfer, print a copy of the AMDISA and place it inside the file folder.
Place a copy of the Form 3185 in the case file and another copy in a suspense file.
Mail the case to the transfer-in address of the new PBC. The transfer-In addresses can be found at: http://wsep.ds.irsnet.gov/sites/co/dcse/sbse/exam/webdocuments/Document%20Library/1/AIMS/Contact%20List.xls
Wait for the receiving industry/area to return an acknowledgment copy of Form 3185. Follow-up if you have not received a receipted Form 3185. If the receiving office has updated the case from the transfer employee group code, consider this acknowledgement that they received the case file.
In addition to the procedures in IRM 4.11.29, Transfer of Returns Open for Examination, the LMSB group secretary must take the following steps when transferring a return between industries.
Transfer the data base on ERCS which will generate a Command Code AMSOC, Disposal Code 30 to update AIMS. The Primary Business Code, Secondary Business Code and Employee Group Code of the receiving office are required. EGC 1917 is not valid as the new EGC unless the prior EGC is 1000, 1014, 1017, 1099, or 1917
Print AMDISA and place it inside the file folder.
Retain a copy of the Form 3185 and place in a suspense file.
Mail the case.
Wait for the receiving industry to return an acknowledgment copy of Form 3185. Follow-up if you have not received a receipted Form 3185. If the receiving office has updated the case from the transfer employee group code, consider this acknowledgement that they received the case file.
Immediately after selection of returns for campus examination, Form 5546 must be checked for the presence of a related year open message.
If Form 5546 indicates that a related year is open, with employee group code other than 5XXX, AIMS research is required to determine the current status.
IF the current status
of the related return is
THEN >10 retain for examination <10 transfer to the industry/area - include an AMDIS print in case file to allow for easier association with the related return
Campus unagreed cases are to be transferred to the area office for an interview before the case is closed to Appeals. See IRM 188.8.131.52 for more information.
When the case needs to be examined by the Campus (EGC 5XXX), use PBC X9X
Between campuses (field cases)
When a field case needs to be transferred from one campus Classification or Centralized Files unit to another Classification or Centralized Files unit, transfer to PBC 201 - 207. Do not use PBC X9X, that is reserved for campus exam (EGC 5XXX) cases only. If the case is already in a status code greater than 08, mail to the PSP office - NOT THE CAMPUS.
Other than transfers to PBC 295 or 398 which is where the Campus TEFRA Units (CTU) are located, it is extremely rare that a case needs to be transferred from the area office to a campus so AIMS blocks these types of transfers. If a record does not have a PICF code of 1-8 or an AIMS Freeze Code of 6, a transfer is not permitted from the area to the campus. If a record does have a PICF code is 1-8 or an AIMS Freeze Code of 6, a transfer to PBC 295 or 398 is permitted. Contact the AIMS Coordinator at the campus for assistance if a transfer is required. If the data base is to be transferred back to the prior PBC, the AIMS Coordinator at the prior PBC can input the transfer. If the data base is to be transferred to a different campus PBC, the AIMS Coordinator at the local campus must input the AMSOC.
The following are procedures for transferring returns to other divisions before the examination is started or completed.
Complete Form 5344 using disposal code 12 (Item 13), an Appeals Code (Item 16), and $1 in Unagreed Amount Appealed/Docketed (item 18).
Such as Department of Justice: Complete Form 5344 using disposal code 12 (Item 13) and $1 in Manual Assessment Amount (Item 35). Attach a copy of the face of the return and Form 2275, Records Request, Charge and Recharge to the Form 5344. Centralized Case Processing (CCP) will forward Form 2275 to the campus files function to "recharge" the administrative file and original return to the requesting agency. Mail the administrative file and original return to the requesting agency.
IF a tax adjustment is being considered, then, update the status code to:
17 - When it is agreed by the examiner, group manager and the Fraud Referral Specialist, that potential for fraud exists.
18 - When the case has been accepted by Criminal Investigation.
A locally defined Fraud Suspense Status Code— when the case is being suspensed out of the group awaiting completion of the criminal case.
If a tax adjustment is not to be made, then,
Survey the return using an electronic print using disposal code 31 or 32.
Complete Form 2275 with the TC 150 DLN with recharge information.
Send the original Form 2275, to the campus.
Send the original return (with a copy of Form 2275 attached) to the requester.
Use same procedures as referrals to Cl but use the locally defined status code for Counsel Suspense Referrals.
See IRM 184.108.40.206, for an example of a completed Form 2275. Below are special instructions for examination employees.
Part A. Document Identification - Required entries are Box 1, 2, 4, 5, 6, 9 and 10. Line 9 is the signature of the manager of the employee listed in Item 12G.
Part B. Originator Information - Required entries are Box 11 through 12I, enter the information for the person preparing the Form 2275. Box 14 enter an X in C.
Part C. Researcher Information - Required entry is 15E, enter the information of the receiving office. such as Criminal Investigation, Division Counsel, etc.
Where to send the return depends on the type of case and where the taxpayer or company resides.
If the case is being transferred to an: Send return to: LMSB group the LMSB group SB/SE Area Office the SB/SE Area Office PSP*
*The address for the above offices, can be obtained from the AIMS web site at: http://wsep.ds.irsnet.gov/sites/co/dcse/sbse/exam/webdocuments/Document%20Library/1/AIMS/Contact%20List.xls . For SB/SE addresses see "Contact Listing" ; for LMSB addresses see "LMSB Groups" both found under the Contacts tab.
Once a message of "Request Completed" is received, the AIMS base reflects the new PBC and the base falls under the control of the new PBC.
Transferring an AIMS data base results in the following changes:
If the Aging Reason Code is 50 or 51, it will be changed to zeroes.
If transfer is from 19X, 29X or 39X to 201-214 or 30X or 315, the Correspondence Received Date will be changed to zero.
The updating of the SBC, EGC and Status Code are dependent on what PBC, SBC, EGC and status code the case was in before the transfer and where the record is being transferred to:
If the transfer is from: going to: The SBC, EGC and STATUS CODE will up updated to: X9X X9X SBC = 00000
EGC = 5598
STATUS CODE = 07
X9X PBC (EGC 5XXX) 201-207, or 315 SBC = 87700
EGC = 2998
STATUS CODE = 07
Non X9X PBC & EGC 1XXX 201-207, or 315 SBC = 87700
EGC = 1998
STATUS CODE = 07
Non X9X PBC & EGC 2XXX 201-207, or 315 SBC = 87700
EGC = 2998
status code = 07
PBC 201-207 or 315 and EGC = 2050 and Status Code = 08 201-207, or 315 remains the same Any PBC (other than 201-207, 212-214, 301-306 or 315 and Status Code = 09-19) 212-214 or 301-306 SBC = screen
EGC = screen
status code = 09
201-207, 212-214, 301-306 or 315 and Status Code = 09-19 212-214 or 301-306 SBC = screen
EGC = screen
status code remains the same
Any PBC 19X, 29X or 398 and PICF = 0 SBC = 00000
EGC = 5598
status code = 07
PBC 298 398 remains the same PBC 398 298 remains the same Any PBC 295/398 AND PICF Code = 1,3,4,5 or 7 SBC = 00000
EGC = 5817
Status Code 34
Any PBC 295/398 AND PICF Code = 2, 6, or 8 SBC = 00000
EGC = 5417
Status Code 33
Any PBC 295 or 398 and AIMS Freeze Code = 6 SBC = 00000
EGC = 5717
Status Code 07
Upon receipt of the return/case file, IMMEDIATELY update the employee group code out of the transfer EGC of 1997, 1998, 2998 or 5598.
If the status code = 33 or 34 and the Exam Start Date is not set, the Exam Start Date will be set with the current date.
If transfer is from 19X, 29X or 39X to 201-214 or 30X or 315, the Letter Sent Code will be changed to zero.
If a case is transferred, (except PBC 3XX to 3XX), and the Project Code is a local Project Code (0175-0200 or 0500-0575 or 0700-0799), the Project Code is zeroed out when the transfer is input.
If transfer is from 19X, 29X or 39X to 201-214 or 30X or 315, the Reply to TP Project Date will be changed to zero.
If the status code = 33 or 34 and the Suspense Code is not set, the Suspense Code will be set to a 2.
If Status Code is less than 20, the Technical Services Code will be changed to zeroes.
If a case is transferred, (except PBC 3XX to 3XX), and the Tracking Code is a local Tracking Code (0001-5999), the Tracking Code is zeroed out when the transfer is input.
Keep the taxpayer in mind when a return is transferred to your industry/area in error. Good customer relations dictate sending the return and updating the data base to the correct location as soon as possible. Therefore, transfer the return and/or data base to the correct office instead of rejecting it back to the sending office. It would be good practice to send a note back to the sending office to alert them of the misrouting.
A receiving industry/area is notified through the AIMS Weekly Update Report (Code 22 or 59) that a data base has been transferred to them.
It is the receiving industry/areas responsibility to locate the return using the following procedure if the return has not been received within 21 days of receipt of the AIMS Weekly Update.
Determine which industry/area office or campus transferred the data base (and therefore needs to be contacted) using information on the AIMS Weekly Update or an AMDISA print listed as the prior PBC.
industry/area codes the TR/PBC reflected on the AIMS Weekly Update. campus codes the campus of the TR/PBC reflected on the AIMS Weekly Update as well as your local campus.
Request that the sender provide a photocopy of Form 3185 (or Form 3210, if used). This should be used to determine where the return was mailed and who acknowledged receipt. The data base must then be transferred or updated to reflect the location of the return.
IF THEN the return cannot be located using the data supplied by the sender follow missing return procedures to dispose of the data base. the sender does not respond Send a follow-up request and wait an additional 21 days. the sender still does not respond, transfer the data base back to the industry/area reflected on the AIMS Weekly Update.
Upon receipt of the return ensure that any local definition project codes are updated.
If the data base does not reflect the correct PBC, research the AIMS base to see if an AMSOC, DC 30 was input. If the PBC still reflects the sending office's PBC and the receiving office:
Wants the base: Does not want the base: Contact the sending office and request an AMSOC, DC 30 is input. Prepare Form 3185 and send case back to either the originator or the correct office if the return was misdirected.
Use the chart below to determine which office should receive the transfer. After you determine the correct Area Office, send the return to the PSP for the Area. DO NOT send cases directly to SB/SE groups.
|District of Columbia||203|
|Kansas City SC||194|
|Estate and Gift||213|